Відео

gamechanger!

would this work to control 2 pedals in the amp fx loop such as delay and tremolo? if so, would you recommend the buffer in this case?

i wanted this but is not being sold in Australia :(

I have a strange issue : no problem with syncing with midi clock - but when I set a « free » preset with no midi clock and tap tempo it seems that the tap tempo overrides the tempo for all presets ???

in the manual there is an example with reverb en delay pedals. My question is....does the loops have spillover when you turn off a loop?

Stevie Ray Vaughan owned a Dumble.

Dan, mere words do not really convey the enormity of what you have accomplished for planet earth. Your gifts, your insights as what Could be, your dedication to creating clean sonic character and the required wisdom to follow the trail, & stay your course, you're a magic man.

Another amazing product solution.

What if you guys made a smaller version where it use a stereo to two mono. So the stereo plug would be connected to the loop and then the two monos would be connected to the in and out of the pedal. It would cut down on the number of jacks on the loop pedal.

I knew a girl and her nickname was humdinger 😮

does this work if i had the midi driver for the g2?

so if i plugged my guitar into a wha and then the wha into the input would that work just fine? so i would have constant acsess to use the wha on everything?

Can it do 18v ?

What is pedal board in this video @TheGigRigDaniel it looks amazing

👍👍👍

Yo! Anyone know why there’s 2 sets of connectors on 13 and 14?

Woof. These guys know their stuff.. but of course. Marr would be a GREAT source of information. Will he be using the new amps with Radiohead? Whenever?

I know this video is from antiquity, but could someone please confirm if I can us G3 for tap tempo on this pedal? I'm seeing mixed opinions on the AMAZE1 and would like to have another option. Thanks.

I’ve had Ed’s signature Fender now for 3 years and absolutely love it!

Living in Canada, where would I get customer support on the G3.

The system seems very cool, I like EXT Kit + Floor Controller ! But where I can find the floor controller? I only find the full G3

How does this work if you have backing and the amp doesn’t have an effects loop? Do you have to reprogram your board ?

Only improvement I can think of is trs jacks for every loop, so that each one can be run in stereo, thus you won’t have to make compromises if you need 12 loops! Otherwise this is just fantastic as is!

Thanks. Another nice video.

Who’s watching in 2024?

Sold. Great explanation! Will be ordering one soon

I have recently bought the TImeline, Mobius and Big Sky. I am dreaming of being able to control them with a GigRig G3. Later this year for sure!

Hi Dan I sent in a warranty or product question 5 days ago, under Matt Gilson. I got mine in February, and I’m experiencing a weird issue suddenly. B side isolated output no sound no matter what. So flip flop mode only A works. In normal mode B side does work but only if A is enabled. If A is disabled everything goes mute. Wondering if you have any insight into this? Using the required power supply, tried a new one, tried different cables, isolated it and used it alone, plugged both amps direct to my Collider no issue or direct guitar. All B is in my dirty amp and nothing more. No matter what amp, cable, correct power supply this happens. I’m a bit stumped on this, and hoping to get it back up very soon. This is all running direct front to Amps, and simple setup I’ve been using with my Sky King and Ampeg VT40 months now with no issues till last Saturday. Thanks, Matt Gilson

This may be a very dumb question, but if the extension board is at my feet, where does your guitar plug in? Is that what the two 1/4" inserts are next to the 7 pin DIN in the back?? I know nothing about 7 pin DIN, so not sure it it's possible for it to send a guitar signal. I'm guessing this how it's done, because it would seem strange to have a 50' 1/4" cable going back to the pedal board off-stage. Clarification here would be much appreciated. One other thing, can the extension kit only be used with the G3, or can it be used with the G3 Atom as well?

Brilliant!!!! I love and appreciate Ed sharing how he creates such a beautiful soundscape!!!! You can hear the passion in everything he says!!!! Thank you

How can I transfer my songlist from the editor to the G3? "download file" says: "file not loaded"

I bought a cheap loop switcher off ebay a few years ago and never looked back. Its nice to switch all pedals in a single button press.

I don't know if I NEED it but I certainly do "need" it.

Great demo!

I love Dan ( and Mick ) - these 2 guys are Necessary

does anybody knows what are those 3 pedals on the top rail of the big board? Beside the microcosm

Hey Dan question: I do not play in a "preset/set list" format but I would still like a loop switcher to save "the tap dance". Is there switchers that just turns on/off individual pedals without having to bank them together?

I’ve had my G3 a few years now. I LOVE IT. Not much of a learning curve, sounds very clean, midi works amazingly well, I run in stereo with no hum, crystal clear cleans, and no signal loss. Gig Rigs tech support is very friendly and have helped me out more than a few times on issues I’ve had (user issues, not G3 issues). I love it!

I’m a proud Gigrig QM6 user. I use it for some simple flip flopping but ultimately it’s there to preserve my signal chain. Wouldn’t use anything else.

Love my G3!! Excellent video Dan!

You really need to separate the control unit/loops and the switching unit using Bluetooth wireless. You don't want the switching unit on your pedalboard because it takes up a lot of the pedalboard space. The switching unit should be bluetooth wireless and able to place it by the mic stand while your pedalboard has the control unit mounted underneath the pedalboard which can have 50 effects loops. Until then its a waste of pedalboard space tell your EE engineers to do a bluetooth wireless version 2.0

I often find myself wishing each and every guitar player could just try a Quartermaster. It's no exaggeration to say your playing life will be changed. I have some cherished pedals but could easily get along without them before giving up my Quartermaster and TheGigRig power supply. These are honestly my only "can't live without" elements. And while it's hard to be amazed anymore, the support team truly are amazing. Thanks, Dan.

I've had G3 since it was released and upgraded to the G3S top board. Unbelievable bit of kit!!! You guys are killing it 🤘🤘🤘

As a guitarist who loves pedals and a huge Radiohead fan, this made my day

I've bought a Carl Martin Octaswitch mk 3 as I wanted to buy a Gig Rig G3 but they were out of stock. So for now, I'm using the Carl Martin as a temporary switch and I already love the lack of tap dancing and my tone is definitely way better going into this thing. I have recently bought a Strymon Timeline, Big Sky and Mobius and will be buying an Eventide H90 in a few months so I really can't wait till I can afford a Gig Rig G3 (and they are available again) so I can use it for midi programming as well as switching the audio signals. Its all very exciting! :)

Show the difference it makes in tone! Love the products and believe the difference, but think it makes a really strong argument to show that difference!

good breakdown

Love my quartermaster x8. It’s built like a tank and works great.

Yeeees! I've had mine for about a year now - best decision I've ever done for my setup. Much love from Greenland

I didn't know he did a newer pedalboard showcase. I loved the other one he did 5 years before this a lot.